GH1035 Nickel alloy coil

The content of chromium and nickel in these alloys is relatively high, and the content of forming elements (V, A1, Ti) in the dispersion strengthening phase is relatively small. Its main form of heat treatment is "solution treatment", through solution treatment can achieve the purpose of strengthening. Solution treatment is also needed to eliminate work hardening and restore plasticity when parts need cold pressing for many times. Parts are usually annealed after welding to eliminate internal stress. Due to the high content of chromium and nickel, the oxidation resistance temperature of this kind of alloy is higher, generally up to more than 900%; However, the strength at room temperature and high temperature is low due to the small number of compounds in the alloy due to the small number of elements forming the dispersion strengthening phase. The structure of this kind of alloy after solution treatment is austenite, so it has good plasticity and can be formed by cold pressing. This kind of alloy is mainly used to make high temperature parts with complex shape, cold pressing, little force, but high oxidation resistance. The most typical part is the combustion chamber of turbine engine.

We have been one of the largest and well-known suppliers to the steel industry. HANHUANG has long been committed to the development of alloys and other special steels. Innovation platforms such as the key Laboratory of Advanced Alloys, the National Laboratory of Physics and Chemistry, the Alloy Engineering and Technology Research Center, and the Railway Rolling stock Steel Structure Engineering and Technology Research Center have been established.

Width :40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length:2000mm, 2500mm, 3000mm, 5800mm,6000mm,12000mm,etc
CertificationISO, SGS
TechniqueCold Rolled, Hot Rolled
EdgeMill Edge  Slit Edge UNS No Generic term Composition

We always adhere to the "customer benefit maximization" service purpose, create maximum value for customers. Warmly welcome customers at home and abroad to visit and consult, and sincerely look forward to working with you to create a better future

When alloying elements are added to steel, iron and carbon, the basic components of steel, interact with alloying elements. The purpose of steel alloying is to improve the microstructure and properties of steel by the interaction of alloying elements with iron and carbon and the influence on the phase diagram of iron and carbon and the heat treatment of steel.

Write a Comment


​Hanhuang Steel is group company in the steel manufacture & Trading, founded in the 2000s, 800+ staff, 25, 000+ m2 non-dust workshop, 40+ great large mills in China


No.118, Beihuan Road, Xishan District, Wuxi +86 13270133639


​Hanhuang Steel is group company in the steel manufacture & Trading, founded in the 2000s, 800+ staff, 25, 000+ m2 non-dust workshop, 40+ great large mills in China

whatapp:+86 13270133639

Get a quote